Closed circuit portable movable shot blasting machine for steel plate
The Closed-circuit movable shot blasting machine for steel plate is a new small, portable, and mobile shot blaster, mainly used to increase the roughness and friction coefficient of rust removal on the surface of large steel plates and bridge deck floor etc.
During the operation of the portable road-surface shot blaster, by controlling and selecting the particle size and shape of the shot abrasive, and adjusting and setting the walking speed of the shot blasting machine, the shot flow rate is controlled to obtain different shot strengths and different surface treatment effects.
Movable Shot blasting machines can be divided into hand-push type, vehicle-mounted type and white line type according to the walking mode. With walking motor, it can walk independently, theoretically climb 30%, can forward and reverse functions, three-phase asynchronous, 380v/480v, 50Hz/60Hz.
Features of Shot Blasting Machine:
- Compact design structure, no foundation required, low noise;
- Movable and portable shot blaster;
- Perfect finishing consistency of plate surface cleaning
- No pollution for environmental protection;
Applications of Shot Blasting Machine:
- Plate: Finishing the sheet surface for painting, coating or cutting, welding, etc.
Characteristics of Portable Shot Blasting Machine:
1. High efficient of Shot wheel Turbines
- Compact shell structure, longer lifespan of blades, lower maintenance;
- Upgraded wearing-resistance with low working noise & vibration;
- High-speed blasting capacity with more recycle abrasive using;
- Optimal blasting angle, velocity and energy-saving;
- Top side installed, optimized shot blast angle and effect;
2. Steel-plate Shot Blasting applications:
- Anti-corrosion coating of steel bridge deck
- Shot blasting machine for steel plate
The application of shot blasting technology in the anti-corrosion coating of steel bridges has been fully affirmed in our country. Most of the bridges under construction and already built choose to use the shot blasting process for surface cleaning and roughness treatment before anti-corrosion primer or other sprayings. The use of shot blasting to treat steel bridge decks can meet the requirements of SA2.5/SA3 steel plate cleanliness, and can control the roughness to meet coating requirements, and the entire process is dust-free and easy to move.
Technical of Close-circuit shot blasting machine:
| Items | SA-270 | SA-550D | SA-850D |
|---|---|---|---|
|
Shot turbines quantity |
1 set |
2 sets |
2 sets |
|
Workable width |
270mm |
550mm |
800mm |
|
Walking speed |
0.5~23m/min |
0.5-33 m/min |
0.5-33 m/min |
|
Concrete surface |
180m2/h |
400m2/h |
600m2/h |
|
Steel plate surface |
40-50 m2/h |
80-100 m2/h |
120-160 m2/h |
|
Shot abrasive diameter |
Ø1.2-1.5mm |
Ø 1.5-1.8mm |
Ø 1.5-1.8mm |
|
Overall size |
1000*300*1100mm |
2050*725*1460mm |
1950*1020*1550mm |
4. Dust Collecting system:
- Cartridge type of dust collector;
- The efficient reach of 99.9%;
- Very easy of replacing of cartridge filters;
- Silencer to minimize of noise;
- Maintenance platform;
5. Electrical Control system:
- Safety interlock for operation;
- IP65 protection for control cabinet;
- Air conditioning;
- 230V/3ph/60Hz or 380V/3ph/50Hz cycle electrics
- PLC / HMI (touch screen control)
- Abrasive level indicator